LUMEN

light2
A lumen is a unit of measurement that is used to express how bright a light source is. An easy way to illustrate this measurement is to imagine a birthday cake with candles. A lamp that puts out one lumen of light is as bright as one birthday candle. A lamp that puts out 100 lumens of light is as bright as 100 candles. Thus the higher the amount of lumens, the brighter the light.

COLOR RENDERING INDEX

light2
Colour Rendering Index (CRI) is a way of measuring how vibrant a light source makes colours appear. In other words, it is a measurement of the light colour quality. The index ranges from 0 to 100. The CRI of one light can only be compared to another light if they have the same colour temperature, which is explained on this page.

COLOR TEMPERATURE

light2
Colour temperature is the colour appearance of the light emitted by a source. The colour temperature of lights can generally be categorised as warm, neutral or cool. Normally, the lower the colour temperature, the warmer the light appears and vice versa. Colour temperature is measured on the Kelvin (K) scale. Cool light aids concentration in work areas whereas warm light helps you relax.




DIMMABILITY

light2
Dimmable lights can be adjusted to the right intensity and deliver different amounts of light depending on the situation. The range of light levels a bulb can produce will be affected by its dimmability.

DAYLIGHT HARVESTING

light2
Daylight harvesting is a technology that senses and recognises light levels as they change throughout the day. A daylight harvesting sensor automatically dims LED lights to maintain an exact light level depending on the amount of light needed in that room at that specific time.

BEAM ANGLE

light2
Beam angle refers to a light source measure of spread and is measured in degrees. A light beam angle is determined when its lux level drops to half of the intensity of the centre beam. Beam angles are commonly 15, 30, 45,60 and 120 degrees.


POWER EFFICACY

Efficacy measures how efficient a light source is at converting electric power to light. It is measured in lumen output per unit power input (watt).
Efficacy = lumen / wattage
Incandescents = 12.8 lm/W
Halogens = 14.4 lm/W
Fluorescents = 45 lm/W
Arraystorm works with LED’s which are rated at 100 lm/W and above.

DESIGN LIFETIME

LED lifetime is the average life of a LED lighting product when operated at nominal lamp voltage. A light’s lifespan will depend on its type. CFL lights are relatively cheap and will last approximately one year. In contrast, LED products have a higher initial cost but last much longer. Our product lifetimes are determined using the IES-LM-80 standard for calculating LED product life. According to these tests, our products have an exceptionally high 80% lumen maintenance at 50,000 hours.

LUX

Lux is a measurement of the light intensity falling on a surface. This measurement determines the brightness of a light in a space and is dictated by International standards. Lux meters are available to determine lighting levels and evaluate the energy efficiency of lighting designs.
One lumen per square meter = One lux
One lumen per square foot = One footcandle


WATT

A watt is a unit of electrical power. We measure electrical usage in watts and pay for our electricity according to the number of watts we use. Typically, a standard halogen incandescent bulb operates at 50 watts. In contrast, LEDs can be just as bright while using about a quarter of the watts.